English
Deutsch
русский
Español
日本語LVT Engineered Wood Flooring
Waterproof LVT Engineered Multi-layer Wood Flooring
Item No.:
PW006Length:
1220 mmWidth:
180mmThickness:
15/2mmLock System:
unilinFinish:
UV + Wear layerConstruction:
LVT+ Multi-layer coreInstallation:
T&GWarranty:
25 years life time structure
Waterproof LVT Engineered Multi-layer Wood Flooring
Anti-scratch LVT Engineered Plywood Core Flooring
Smoked Engineered Oak Flooring
UV Oil finish has a very low build thickness (thin coat) which results in an attractive flooring type finish. The oil penetrates the surface of the wood, providing a luxurious appearance not seen in conventional UV Urethane floors. UV Oil Finish can achieve a very low gloss level, even 2-4% compared to UV urethane finishes between 15% and 60%, that reflects a minimal amount of light while still highlighting the natural beauty of the wood grain. Such a low gloss level is particularly beneficial when it comes to dents, dings, and other common house hold or commercial mishaps which are much less noticeable compared to high gloss level finishes. With UV Oil Finishes, less is better. Because UV Oil Finish is thin and flexible, it can handle impacts, conforming to the dent. The finish stays intact to continue protecting the wood rather than chipping or flaking away. UV Oil Finish is very environmentally friendly. It is made of 100% solids and contains no solvents or after cure products. There is no post-installation off gassing of any kind. One of the greatest benefits of UV Oil is its ease of repair. Conventional UV cured urethane finishes are extremely difficult to repair because of the thick finish on top of the wood. Once the finish is broken it is virtually impossible to touch up seamlessly, instead requiring sanding and recoating of the whole floor. UV Oil Finishes, however, are easy to repair and blend without any noticeable spots. It’s as easy as wiping touch-up oil on a cloth, rubbing it into the wood and letting it dry for one hour. Oil finishes are perfect for commercial applications such as restaurants, where there will be considerable wear on the floor. Hardwood floors will dent and scratch, but with a UV Oil Finish the floor can look almost new in no time.
Glue Down Vinyl Plank Flooring For Sale
Co-extrusion SPC floors
